ProductDetail

MYRA 214L

LINE ARRAY 1600W + 640W - 147 DB SPL (PEAK)

Weatherproof - EN54-16

digital processor

switch mode power supply

flying hardware

neodymium driver

Click on the image to zoom

The heart of the 3-way Myra 214L line array features two uniquely designed neodymium coaxial compression drivers that combine 4" VC mid-frequency and 2.5" VC high-frequency into a 1.4" throat, developed in cooperation with B&C, and covering the 400Hz to 20kHz range. Combined output from the compression drivers are loaded by a proprietary short path and very wide bandwidth waveguide that ensures low distortion and controlled 90° horizontal broadband directivity. 

With extended frequency response down to 40Hz, which in most applications avoids the need for subwoofers, the low frequency section employs uniquely sized neodymium 14" drive units with 3" long excursion voice coils and very high BL force factor to maintain complete control on the cone movement and projection of low frequencies. The MYRA 214L is Bi-Amped through a NEUTRIK NLT4 connectors, one channel for LF and one for the MID/HF with internal passive crossover. The lowest octave of the Myra system is seamlessly reproduced by the companion Myra 218S, a reflex-loaded dual 18" subwoofer featuring custom-designed, very long excursion B&C drivers.

  • Configuration: 3 way
  • Low Frequency Woofer: 2 x 14'' - 3'' VC Neodymium
  • Mid/High Frequency Driver: 1 x 1.4'' - 4'' VC MF / 2.5'' VC HF Neodymium
  • Recommended Amplifier: 1600W RMS LF / 600W RMS MF-HF
  • Maximum SPL: 147dB
  • Material: Baltic birch plywood

CABINET & RIGGING

The cabinet construction typifies our signature Made in Italy production philosophy. Completely fabricated in-house using premium Baltic birch and tour-ready weather-resistant polyurea coating, the 214L is built for a life on the road. Audio crews will appreciate the intuitive four-point integrated rigging system which allows up to 24 cabinets to be flown quickly and easily in any venue with splay angle from 0.25° to 8° (0.25°, - 1,° -2°, - 3°, - 4°, - 5°, - 6°, - 8°).

An auto-locking internal mechanism makes it easy to set arrays at the desired inter-element angles using selector pins and securely lock all cabinets at the selected angle when lift-up. MYRA 214L comes with a four-point rigging system consisting of two adjustable arms and two housings with ball lock pins on either side of the unit. Myra 214L comes with a four-point rigging system consisting of two adjustable arms and two housings with ball lock pins on either side of the unit. Graduated flange, making it possible to select the angle of the unit.

Watch the video

Learn more about technical excellence and innovation brought by Myra, the top line array series that meets the highest standards of quality.

Technical specifications
Code: 42655
Configuration: 3 ways
Recommended amplifier: 1600 LF - 600 MF/HF W RMS
Long Term power: 800 LF - 300 MF/HF W
Short term power: 3200 LF - 1200 MF/HF W
Nominal impedance: 4 Ohm LF / 16 Ohm MF/HF
Frequency response: 40Hz - 20Khz -6dB
Low Frequency woofer: 2 x 14" (neo) - 3" VC
High frequency driver: 1,4" (neo coax) - 4" VC MF - 2,5" VC HF
Maximum SPL cont/peak: 147dB
Dispersion: 90 x depends on curvature and number of elements HxV
Input connector: Neutrik NL T4MP
Net Dimension (WxHxD): 930x400x530 mm - 36,61x15,70x20,86 inch
Net Weight: 61,5 kg - 135,58 lb
Transport Dimension (WxHxD): 1050x501x630 mm - 41,3x19,7x24,8 inch
Transport Weight: 70 Kg - 154,3 lb
Accessories
MR-F214
MR-FJ214
MR-J214
MR-P214
MR-T214